Hydraulic Rubber Hose SAE100 R2 EN 853 2SN two braids of high-tensile steel wire.For high pressure hydraulic systems in industry and agriculture.

EN 853 2SN Steel Wire Reinforced Hydraulic Rubber Hose · They can withstand the temperature of -40 °F to +212 °F. · They can use with petroleum, synthetic or 

12/22 · Product: EN853 2SN / SAE100 R2AT Description: High Pressure Steel Wire Braided Rubber Hose Application: It is suitable to carry hydraulic fluids, such as hydraulic oil, fuel oil,

Specification of Hydraulic Hose SAE 100 R2AT/2SN. SAE 100 R2AT Double wire braid hydraulic hose Medium pressure service with high temperature petroleum-based hydraulic fluids, hot oil, grease, lubricants and crude oils, air and water. For air or gas application above 250 PSI (1.7 Mpa) the cover should be pin-pricked. Part No.

REINFORCEWMENT : TWO HIGH TENSILE STEEL WIRE BRAIDS. CONFORMING TO STANDARD : EN 853 2SN: SAE 100R2AT: DIN 20022 2SN. TEMPERATURE RANGE :

Recommended for extremely high-temperature, high-pressure hydraulic oil line applications such as engine compartments, foundries, etc. where pressure or temperature requirements exceed SAE 100R2, ISO 1436 2SN R2 and EN 853 2SN or where resistance to either petroleum-base or phosphate ester fluids is required. Meets SAE J1942 requirements.

G2 Wire Braid Hose - EN 853 2SN Recommended for high-pressure hydraulic oil line applications. Recommended Couplings: PCK Couplings (-4 to -16), Global Braid Couplings -GB (-4, -6 to -16), Field Attachable Type T Couplings (-4 through -24), GlobalSpiral™ Couplings, GlobalSpiral™ Plus Couplings, MegaCrimp® Couplings, Power Crimp® Couplings (-3 only),

Two braided high pressure hose according to EN 853 2SN standard. High pressure hoses are used for most hydraulic systems of mobile machines and equipment 

Hydraulic Rubber Hose SAE100 R2 / EN 853 2SN Product Description Recommended For: High-pressure hydraulic lines. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type S EN853 2SN. For high pressure hydraulic systems in Tube:

Wire Braid Hydraulic Hose meets EN 853 2 SN, SAE 100R2 and ISO 1436 2SNR2. DIN EN 853 2 SN. Nominal. Inside. Braid. Outside. Working pressure.

Balflex® DIN EN 853 2SN / SAE 100R2AT – 10.1004. According to ISO 1436 / DIN EN 853 type 2SN / SAE J517 type SAE 100R2 AT High pressure, double steel braid reinforced hydraulic hose Inner tube : Reinforcement : Outer tube : Safety factor : 2 high

Hypress EN 853 2SN R2AT Hydraulic Hose. Internal hose. Synthetic rubber, extruded whole without joints, of uniform thickness.

EN 857 2SC steel wire reinforced hydraulic hose is similar to EN 853 2SN steel wire reinforced hydraulic hose in structure. The difference is that it has smaller outside diameter, which is suitable for the equipment piping whose installation space is compact and narrow.

Parker's Medium Pressure No-Skive hose 301SN and 301TC according to EN 853 2SN - ISO 1436 Type 2 with the No-Skive thin cover hose construction is the ideal 

Cover: Environmment resistant synthetic rubber. Applicable specs: Exceed EN 853 2SN, SAE 100 R2AT, ISO 1436-1 2SN/R2AT Type approvals: ABS, BV, BWB, DNV, GL 

The braided flexible hose in compliance with SAE 100 R2AT DIN-EN 853-2SN is widely used in the oil-pressure equipment sector for pressures ranging from 80 

EN 853 2SN Steel Wire Reinforced Hydraulic Hose for Outdoor Applications EN 853 2SN steel wire reinforced hydraulic hose is suitable for delivering water and petroleum-based hydraulic fluids in the working temperature of -40 °C to +100 °C. And it can work intermittently in the temperature of 120 °C.

Balflex® DIN EN 853 2ST / SAE 100R2A – 10.1003. High pressure, double steel braid hydraulic hose with thick rubber cover. (same working and burst pressure as 

Hydraulic hose - 5/16" - EN 853-2SN ; Product specifications. Inside Ø (mm):. 7,9 mm. Inside Ø (inch):. 5/16". Working pressure: 350 bar. Bending radius: 115 mm.

Hydraulic Hose EN853 1SN and EN 853 2SN – Single or Double Braid of Steel Wire. Our medium pressure hydraulic hoses have two types including hydraulic hose EN853 1SN and EN 853

According to: ISO 1436 / DIN EN 853 type 2SN / SAE J517 type SAE 100R2 AT. Features: Our SAE 100R2AT / DIN EN 853 2SN Hydraulic Hose has a greater working and burst pressure compared with only SAE100R2AT. High Pressure, Double Steel Braid Reinforced Hydraulic Hose for Petroleum Base Hydraulic Fluids. Seamless Oil Resistant Synthetic Rubber.